Sound Bar with Subwoofer Quick Start Guide

TECHNICAL SUPPORT

There is no power.

• Press the POWER button on the remote control or on the top of your Sound Bar.

• Ensure the power cords are securely connected.

• Turn the Subwoofer power switch to ON.

• Plug a different device into the electrical outlet to verify that the outlet is working correctly.

• To conserve power, the Sound Bar shuts off automatically after 30 minutes if not in use.

There is no sound from

the Sound Bar.

• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.

• Press MUTE on the remote to ensure the Sound Bar is not muted.

• Select a different input source (Analog, Coaxial, or Optical).

• Be sure the audio cable coming from the TV is connected to an audio output, not an audio input.

• If listening to a USB source, be sure the les are in MP3 format.

I hear buzzing or

humming.

• Ensure all cables and wires are securely connected.

• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may

be with the original device.

• Connect your device to a different input on the Sound Bar.

There is no sound

coming from the

Subwoofer.

• If the lights on the Subwoofer are in a slow blink pattern, you will need to pair the Subwoofer

with the Sound Bar. See Re-Linking the Subwoofer and Sound Bar on page 14.

• Move the Subwoofer closer to the Sound Bar.

• Turn the Subwoofer power switch to ON.

• To conserve power, the Subwoofer will automatically enter a low power state when not in use. It may take up to 10

seconds for the Subwoofer to link after the Sound Bar is turned on.

How do I listen to

SRS TruSurround or

Dolby Digital?

• To activate SRS TSHD, press the Menu button on the remote and use the arrow keys to scroll to the TSHD screen to

toggle between on and off.

• To listen to Dolby Digital, your device must be playing content in Dolby Digital format. Dolby Digital is only

available over Digital Coaxial or Digital Optical.

I would like to adjust the

sound on the Subwoofer

and Sound Bar.

• Adjust the bass and treble levels using the remote.

• Try enabling/disabling SRS TruSurround.

I want to return my

Sound Bar to factory

settings.

• Press and hold the Power, Volume Up, and Volume Down buttons for 10 seconds to return your Sound Bar to its factory

default settings.