Manual

VlZIOVA26LHDTV10TUserManual
IfyourHDTVfailsortheperformancechangesdramatically,followthestepsinthetroubleshootingtable
below.Remembertocheckperipheralsaswell,topinpointthesourceofthefailure.IfyourHDTVstillfails
toperformasexpected,contacttheVIZIOforassistancebycalling1-877-MYVIZIO(877-698-4946)or
[e-mail].
"No Signal" error message
No power
No sound
The screen is black
Power is ON but there is no screen
image.
Colors are wrong or abnormal
Control buttons do not work •
Remote Control does not work
Image quality issues
Picture is distorted picture
There is an unusual sound
• Press INPUT to select a different source
• Make sure the power is ON The VlZlO logo wilt be white
• Make sure the power cord is securely connected to the back of your HDTV
and the power outlet
• Connect another electrical device into the power outlet to verify that the
outlet is supplying the proper voltage
• Check your audio connections on the back of your HDTV and on the back of
the component
• Make sure the volume is not turned down
• Make sure that the sound is not muted
• Make sure that headphones are not connected
• Check your audio settings in the OSD See "Adjusting the Audio Settings"
Your HDTV audio may be set to SAP, minimum, or speakers off
• Check the connections on the back of your HDTV and on the back of the
component
• Make sure the power cord is securely connected to the back of your HDTV
and a grounded power outlet
• Make sure the power is ON The VIZIO logo wilt be white
• Make sure that the selected input source (ie DVD player) is working
properly
If your HDTV is connected to your computer in RGB or HDMI mode, press
any key on your keyboard to "wake" your computer
Check the connections on the back of your HDTV and on the back of the
component
Adjust brightness and contrast
Press INPUT to select a different source
If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected
Press only one button at a time
Make sure batteries are inserted correctly
Replace expired batteries
Press the correct source on the remote control (ie TV to control the TV
source).
Standard, analog TV wilt always be noticeably inferior to HD because your
digital flat panel TV has video that is many times better than older TVs. You
wilt see interference and deficiencies you did not know you had.
• For best image quality, view HD wide screen programs where possible.
• If HD content is not available view "Standard Definition" from a digital
source.
• You may be getting interference from electrical appliances, cars,
motorcycles, or fluorescent lights. If you have not mounted it on the wall, try
moving your HDTV to another location to see if this is the cause of the
problem.
• You may be getting interference from a device on the same electrical circuit.
Try plugging your HDTV into another power outlet.
• You may be getting interference from electrical appliances, cars,
motorcycles, or fluorescent lights. If you have not mounted it on the wall, try
moving your HDTV to another location to see if this is the cause of the
problem.
Version 6/5/2008 59
www.VlZIO.com