Manual

VlZIOVA26LHDTV10TUserManual

A llStit g the TV sedil gs

If you did not set up your HDTV for DTV / TV channels using the Initial Setup screens or if your setup has

changed, you can do so from the TV menu.

Taaer Mede

1. Press MENU on the remote control or the side of your HDTV, then press • repeatedly until the

TV menu opens.

2. Press A or • to select Tuner Mode, then press _1or • to choose Cable or Antenna (Air)

depending upon which equipment you have connected to the DTV / TV Input.

3. Press EXIT to exit the OSD.

Aato Search

Your HDTV can scan for channels in your area and store the channel information in the channel list. If a

channel does not have a signal, your HDTV skips that channel. When you press CH Aor CH•, your

HDTV changes to the next channel in the channel list.

1. Press MENU on the remote control or the side of your HDTV, then press • repeatedly until the

TV menu opens.

2. Press Aor • to select Auto Search, then press •. The Auto Search screen opens and begins

searching for analog and digital channels.

3. When the channel search is complete, press EXIT to exit the OSD.

Version 6/5/2008 43