User's Manual
Table Of Contents
- V-Series ™ User Manual
- Table of Contents
- Safety & Certification
- Getting to Know Your TV
- Completing the First-Time Setup
- Using the On-Screen Menu
- Your TV features an easy-to-use on-screen menu .
- NAVIGATING THE ON-SCREEN MENU
- CHANGING THE INPUT SOURCE
- ADJUSTING THE PICTURE SETTINGS
- Adjusting the Color Temperature
- Changing the Picture Aspect Ratio
- Adjusting Advanced Picture Settings
- Adjusting the Color Tuner Settings
- Adjusting Picture Input Settings
- Adjusting the Picture Mode Edit Settings
- Saving a Custom Picture Mode
- Copy a Picture Mode
- Lock a Picture Mode
- Deleting a Picture Mode
- Resetting a Picture Mode
- ADJUSTING THE AUDIO SETTINGS
- ADJUSTING THE NETWORK SETTINGS
- SETTING UP TV CHANNELS
- ACCESSIBILITY SETTINGS
- CHANGING THE SYSTEM SETTINGS
- USING THE ADMIN & PRIVACY MENU
- USING THE INFO WINDOW
- SmartCast Home™
- WatchFree™
- Playing USB Media
- Product Registration and Technical Support
- Help Topics
- Specifications
- Regulatory Information
- Limited Warranty
- UNITED STATES AND CANADA
- How Long This Warranty Lasts
- What This Warranty Covers
- Zero Bright Pixel Defect Guarantee (Displays Only)
- How to Get Service
- Your Obligations Before Service
- VIZIO’s Responsibilities
- Types of Service
- What This Warranty Does Not Cover
- What to Do If You Are Not Satisfied With Service
- Binding Arbitration Agreement; Class Action Waiver (U .S . Residents Only)
- Exceptions to Binding Arbitration Agreement and Class Action Waiver
- Exclusions and Limitations
- How the Law Applies
- General
- Changes to Warranty
- Legal Information
10
3
To adjust the color management system/20 point white balance
settings:
1. Use the Navigation buttons on the remote to highlight the Hue, Saturation,
Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button.
2. Use the Left/Right Navigation buttons to adjust the value. When you are
finished press the OK button to save the setting.
To adjust the 20 Point White Balance settings:
3. From the Color Tuner table, use the Navigation buttons to highlight the top bar
and then press the Left/Right Navigation buttons until the 20 POINT WHITE
BALANCE menu is displayed.
4. Use the Navigation buttons on the remote to highlight the Gain and Color values
you wish to adjust. Press the OK button and use the Left/Right Navigation
buttons to adjust the value. When you are finished, press the OK button to save
the setting.
Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the color management system, 20 point
white balance, turn color channels off for testing, and display SMPTE, flat, ramp, and
uniformity analyzer test patterns.
To access the color tuner table:
Menu > Picture > Advanced Picture > Color Calibration > Color
Tuner
To turn color channels o and on:
1. Use the Navigation buttons on the remote to highlight Red, Green, or Blue.
2. Press the OK button to turn the color channel off or on. An X appears over a
color channel that has been turned off.
3. Only two color channels can be turned off at the same time.
To show or hide the SMPTE Test Pattern:
Menu > Picture > Advanced Picture > Color Calibration > Color
Tuner > SMPTE Test Pattern
1. Use the Navigation buttons on the remote to highlight Off. Use the Left/Right
Navigation buttons to select On to show the SMPTE Pattern.
—or—
2. To hide the SMPTE Test Pattern, use the Left/Right Navigation buttons to
select Off.
SMPT Test Pattern
O
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
Oset 0 0 0
Gain 0 0 0
20 Point White Balance
Gain Red Green Blue
5% 0 0 0
WARNING: The Color Tuner, 20 Point White Balance, and
test patterns allow technicians to manually calibrate the TV.
Calibration requires specialized training, an input with precisely
set colors, and a specialized light meter.
TIP: Any changes made affect the color temperature setting.
Select the preferred color temperature setting first. See Adjusting
the Color Temperature on page 8.