User Manual
Table Of Contents
- VIZIO 2.1 Sound Bar User Manual
- Accessibility ,
- IMPORTANT SAFETY INSTRUCTIONS ,
- TABLE OF CONTENTS ,
- Package Contents ,
- Controls & Connections ,
- First-time Setup ,
- Back of Subwoofer
- 1 Choose the best possible connection cable type and connect it to your TV.*
- 2 Connect the power cable to the sound bar AC IN as shown.
- 3 Connect the power cable to the subwoofer.
- 4 Plug the power cable into a power outlet.
- 5 The subwoofer should automatically power on and link to the sound bar when plugged in. The LED will glow to solid to confirm.
- 6 Remove the battery cover by gently sliding it away from the remote.
- 7 Insert the included batteries and gently slide the battery cover back into place.
- 8 After turning on both your TV and sound bar, it will automatically begin searching for an active input.* The LED indicator on the front of the sound bar will begin cycling in different colors through inputs until an audio source is detected. Double Asterisk
- Using the Remote ,
- Proper Placement ,
- Mode & Level Settings ,
- Using Button Combinations ,
- Programming the Sound Bar ,
- Bluetooth Pairing ,
- Using Bluetooth Mode ,
- Connecting to a Voice Assistant ,
- Advanced Setup ,
- Connecting a Subwoofer ,
- 1 First confirm that the power LED is illuminated. Press and hold the ON/OFF button on the back of the subwoofer for 5 seconds. The LED on the back of the subwoofer will begin to blink.
- 2 Press and hold the Power button on the top of the sound bar for 5 seconds. The LED indicators on the front will flash 3 times. The subwoofer is now linked with the sound bar.
- Product Registration and Support ,
- Help & Troubleshooting ,
- Limited Warranty ,
- UNITED STATES
- How Long This Warranty Lasts
- What This Warranty Covers
- How to Get Service
- Your Obligations Before Service
- VIZIO’s Responsibilities
- Types of Service
- What This Warranty Does Not Cover
- What to Do If You Are Not Satisfied With Service
- Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)
- Opt-Out Instructions
- Exclusions and Limitations
- How the Law Applies
- General
- Changes to Warranty
- Legal & Compliance ,
- Specifcations ,
Using the Remote
Input
Change the input source.
*
(Long press for Auto Input Search)
(Long 10 second press to enable/disable AUX VA)
Virtual:X
Turns Virtual:X on/o.
Bluetooth
Switches to Bluetooth mode.
(Long press for Pairing Mode)
(Long 10 second press to enable/disable BT VA)
Previous
Return to previous track.
(Changes audio settings)
Up/Down
Changes audio settings.
EQ
Cycle through EQ settings.
Bass
Press the Previous/Next buttons to
increase/decrease the bass level.
Mute
Mute/unmute.
(Long press to turn LED power indicator and
voice notications on/o)
ENG - 10
Power
Turn on or o.
TruVolume
Turns TruVolume on/o.
OK
Select an option, play or pause.
(Long press for Info)
Next
Skip to the next track.
(Changes audio settings)
Subwoofer
Press the Previous/Next buttons to
increase/decrease the subwoofer level.
(Long press for Night Mode)
Treble
Press the Previous/Next buttons to
increase/decrease the treble level.
Volume +/-
Increase and decrease volume.
*Long press both the INPUT and PREVIOUS buttons to
select previous input.