Quick Start Guide

English - 14
Function LED Behavior Description
Equalizer
Mode
Press the EQ button to toggle between two preset equalizer settings, Music
and Movie.settings, Movie, or Music. Note: Movie mode is on by default
Treble
Level
Press the TREB button then press the Next/Previous button to increase/
decrease the treble level. The LED indicators will move up with increasing
levels and down with decreasing levels.
Bass
Levels
Press the BASS button then press the Next/Previous button to increase/
decrease the bass level. The LED indicators will move up with increasing
levels and down with decreasing levels . Decreasing the BASS level to the
lowest setting will reduce BASS and Subwoofer levels on the bar. This is
best for watching TV late at night in a quiet environment.
Virtual X
Mode
Press the VRT:X button to enable/disable Virtual X. When enabled (On), all
inputs will produce a virtual sound technology that simulates the eect of
having overhead sound. When disabled (O), all sources will playback in
stereo.
When a Dolby Audio
signal is detected.
Dolby Audio is only available on the Digital Optical Audio In inputs. When
a Dolby Audio signal is detected, the Dolby Audio indicator LED will light up
for 3 seconds before fading away.
Three center LEDs
indicate Treble level 0.
Three center LEDs
indicate Bass level 0.
Dolby Audio
Indicator LED
Movie
Music
Enabled
Disabled