VIZIO QUICK START GUIDE Model: SB2920-C6
IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. • Read these instructions. • Keep these instructions. • Heed all warnings.
TABLE OF CONTENTS Package Contents..................................................................... 4 Controls & Connections........................................................... 5 First-Time Setup....................................................................... 7 Using the Remote..................................................................... 11 LED Indicators........................................................................... 12 Bluetooth Pairing.................................
PACKAGE CONTENTS High Definition Sound Bar Power Adapter 2 x Sound Bar Wall Mount Brackets Remote Control with 2 x AAA Batteries Coaxial Audio Cable Stereo RCA to 3.
CONTROLS & CONNECTIONS Back of Sound Bar SUB OUT Subwoofer Out OPTICAL (4) Digital Optical Audio In DIGITAL (3) Coaxial In * Supports .WAV file format playback only. AUX (2) Analog Audio In (Stereo 3.
Bluetooth Input Hold to pair. (See ‘Bluetooth Pairing’ for more information.) Volume Increase or decrease the loudness of the audio. Input Press to change the audio source. Power Press to turn Sound Bar on or off.
FIRST-TIME SETUP 1 CHOOSE ONE CABLE GOOD OR BETTER Back of Sound Bar DIGITAL OPTICAL CABLE† DIGITAL COAXIAL CABLE†‡ 3.5MM TO RCA CABLE 3.5MM TO RCA CABLE BETTER BETTER GOOD GOOD * Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-Ray player, game system, etc.) see your device’s user manual.
2 Connect the included power adapter to the Sound Bar DC IN as shown. Plug the power adapter into an electrical outlet.
3 For the best surround sound experience, position the Sound Bar as shown. The Sound Bar should be close to ear level. Sound Bar is centered below the TV.
4 5 Top Remove the battery cover by gently sliding it away from the remote. 6 Top Insert the included batteries and gently slide the battery cover back into place. Turn your TV on, the Sound Bar will automatically turn on and begin searching for an active input. The LED indicators on the front of the Sound Bar will begin cycling in pairs through inputs until an audio source is detected.* Input Tip: Pressing the INPUT button will stop the auto detect function.
USING THE REMOTE Bluetooth Press to enter Bluetooth input. (To enter force pair mode, press and hold for 5 seconds) Input Press to change input source. Press and Hold for 3 seconds to enable the Auto Input Detection mode. Power Press to turn on or off. Enter/Play/Pause Press to select an option. Press to play or pause. Volume +/Press to increase and decrease volume. Previous Press to return to previous track. (Changes Treble and Bass levels) Next Press to skip to the next track.
LED INDICATORS LED Indicators are located here. The LED Indicators will behave differently with each button on the remote control. Bluetooth Pairing Description USB In - USB (6) Bluetooth Digital Optical Audio In Optical (4) Coaxial In - Digital (3) Analog Audio In - AUX (2) Input LED Behavior Analog Audio In - AUX (1) Function (When searching for device) Flash from Left to Right and back continuously.
LED Indicators are located here. Function LED Behavior DTS TruSurround On/Off TruSurround On TruSurround Off Description Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will produce virtual surround sound. When disabled (Off), all sources will playback in stereo. Levels Two center LEDs indicate Treble level 0. Press the TREBLE button then press the Next/Previous button to increase/decrease the treble level.
BLUETOOTH PAIRING To pair the Sound Bar with a Bluetooth device: 1. Press and hold the Bluetooth button on the Sound Bar or the Bluetooth button on the remote for five (5) seconds. When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from bottom to top and back again. Once the device is paired, the LED Indicators will stop flashing. 2. You can now search for the Sound Bar (VIZIO SB2920) using your Bluetooth device.
USING BLUETOOTH MODE Maximizing Signal Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired, even if you change the input on the Sound Bar. A Bluetooth signal has a range of up to 30 feet.
ADVANCED SETUP Back of Sound Bar DIGITAL OPTICAL CABLE Game Console * Supports .WAV file format playback only. DIGITAL COAXIAL CABLE 3.5MM TO RCA CABLE Network Media Player 3.
CONNECTING A SUBWOOFER Back of Sound Bar RCA Subwoofer Cable* To connect a subwoofer: 1. Press the BASS button on the remote control to enter bass adjustment mode. 2. Use the Previous/Next buttons to adjust the bass level to the center position. 3. Power Off the Sound Bar and Subwoofer. Connect an RCA cable from the Sound Bar to the Subwoofer. 4. Power On the Sound Bar and Subwoofer. 5. Manually adjust the SUB gain (Volume) and phase to your preference.
USING BUTTON COMBINATIONS Buttons are located here. There are 3 functions that are triggered by 3 different button combinations on the Sound Bar. Function Factory Reset LED Behavior All 12 LEDs will flash 3 times Description Reset the Sound Bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds. Note: This will erase all settings and preferences that you have set.
WALL-MOUNTING THE SOUND BAR 1 Back of Sound Bar Wall-Mount Screw Holes Insert the two wall-mount screws into the wall-mount screw holes, and then tighten them with a Phillips screwdriver. 2 Place the included wall mounting template against the wall under your TV. Mark the four bracket holes using a pencil.
3 Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for brick/concrete walls). Screws for attaching the brackets to the wall are not included. Choose the screw type and length appropriate to your home’s construction. If in doubt, consult a professional installer. 22.5 8 in If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer. 20 (57.
VIZIO RECOMMENDS Picture Perfect. Simply Smart. All-new for 2014, the E-Series is packaged in a sleek new design. Experience more vibrant colors, more pronounced darks, more premium apps, and truly epic entertainment at an unbeatable value on the all-new, beautifully redesigned E-Series. Available at VIZIO.
VIZIO RECOMMENDS Premium High Speed HDMI Cable This all-in-one HDMI® cable can be used for high definition video and audio. The 1080p and 4k x 2k Ultra High Definition capabilities are ideal for bringing sports, movies and games to life in vivid detail on your HDTV. It also supports 7.1 surround sound and audio return channel, enabling your TV to send and receive audio signals without additional cables. Available at VIZIO.
HELP & TROUBLESHOOTING There is no power. There is no sound. • Press the POWER button on the remote control or on the top of your Sound Bar. • Ensure the power cord is securely connected. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar. Press MUTE on the remote to ensure the Sound Bar is not muted.
Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with: • New Product Setup • Connecting Your Devices • Technical Problems • Product Updates • And More Live Chat Support Available You can also contact our award-winning support team at: Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.
Take A Moment To Register Your Product At VIZIO.COM/PRODUCT-REGISTRATION Why Register? Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications.
ONE-YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
© 2015 VIZIO INC. ALL RIGHTS RESERVED.
