user manual

VIZIO VA320M User’s Manual
Version 5/19/2009 21
www.VIZIO.com
STEREO SYSTEM
Connecting an external
Receiver/Amp
Optical Output of Audio received with HD Programs
If your sound system has an SPDIF (optical) digital
audio input you can connect it to the optical AUDIO
OUT (white area on the back or your HDTV). This is
active when receiving audio with the program being
viewed no matter what input is being used.
1. Turn off the power to the LCD HDTV and
Receiver/Amp.
2. Using an audio cable (optical cable), connect the
cable to the audio input connector on the
Receiver/Amp and connect the other end to the
OPTICAL OUT (white area) audio connector at the
rear of the LCD HDTV.
3. Turn on the power to the LCD HDTV and
Receiver/Amp.
4. Then press the MENU button on the remote
control to open the On-Screen Display (OSD)
menu.
5. Press the
on the remote control to select the
Audio menu.
6. Press the
on the remote control to select
SPEAKERS.
7. Press the MENU/SELECT key on the remote
control to select OFF so that the sound from the
HDTV will now be routed through your
Receiver/Amp system.
Press the ◄ key once to return to the previous screen
or repeatedly to return to your program if task has been
completed or press the EXIT key to close the OSD
screen and exit to watch your program.
Note:
Refer to your Receiver/Amp user manual to select
the corresponding audio input.
The audio output can not be connected directly to
external speakers.