user manual

VIZIO VA320M User’s Manual

www.VIZIO.com

CABLE BOX

VCR

Connecting Coaxial (RF)

Using Your Antenna or Digital Cable for DTV /TV

1. Turn off the power to the HDTV.

2. Connect the coaxial (RF) connector from your

antenna or digital cable (out-of-the-wall, not from

the Cable Box) to the DTV/TV CABLE/ANTENNA

connector.

3. Turn on the power to the HDTV.

4. Select DTV using the INPUT button on the remote

or side of your HDTV, or by pressing the TV button

on the remote control.

Note: Not all digital TV broadcasts are High

Definition (HD). Refer to the program guides, or

consult your cable, satellite or TV station operator.

Digital broadcasts are not available in all areas.

Refer to www.antennaweb.org for detailed

information. Make sure the antenna and coaxial

cable are correctly grounded.

For Professional antenna installation contact us at

www.VIZIO.com or call 1-888-VIZIOCE

(1-888-849-4623).

Using the Antenna or Cable through your VCR

1. Turn off the power to the HDTV and VCR.

2. Connect the “Output to TV”, “RF Out” or “Antenna

Out” connector on the rear of your VCR to the

DTV/TV CABLE/ANTENNA connector at the rear

of the High Definition TV.

3. Turn on the power to the HDTV and VCR.

4. Select TV using the INPUT button on the remote

or on the side of your HDTV, or by pressing the TV

button on the remote control.

Note: If you have an off-air antenna or cable TV,

connect it to the “Antenna In” connector on the

rear of your VCR.