User Manual
Table Of Contents
- M-Series™ 2.1.5 User Manual
- Accessibility
- IMPORTANT SAFETY INSTRUCTIONS
- TABLE OF CONTENTS
- Package Contents
- Controls & Connections
- First-time Setup
- Using the Remote
- Proper Placement
- Mode & Level Settings
- Using Button Combinations
- Programming the Sound Bar
- Bluetooth Pairing
- Using Bluetooth Mode
- Connecting to a Voice Assistant
- Advanced Setup
- Connecting with HDMI ARC
- Connecting a Subwoofer
- Wall-mounting
- Product Registration and Support
- Help & Troubleshooting
- Limited Warranty
- UNITED STATES
- How Long This Warranty Lasts
- What This Warranty Covers
- How to Get Service
- Your Obligations Before Service
- VIZIO’s Responsibilities
- Types of Service
- What This Warranty Does Not Cover
- What to Do If You Are Not Satisfied With Service
- Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)
- Opt-Out Instructions
- Exclusions and Limitations
- How the Law Applies
- General
- Changes to Warranty
- Legal & Compliance
ENG - 22
Turn on the AUTO VA Settings:
1. Press the Setup button and use the up/down buttons to go to the AUTO VA setting.
2. Use the left/right buttons to change the setting to AUX/BT or BOTH (depending on how you connect).
Connecting to a Voice Assistant
Connect to the AUX VA port only
OR
3.5mm Audio Cable
(If there is no AUX port on the VA device, use a Bluetooth connection instead.)
• Use a 3.5mm audio cable to connect the AUX VA port on the sound bar to an AUX port on your voice assistant device.
Using the AUX VA Port to Connect
Using Bluetooth to Connect
• Press and hold the Bluetooth button on the sound bar or remote for three (3) seconds. Search for the sound bar (VIZIO
M215aw) using your VA device app. For more information, refer to the user documentation that came with the device.