Service manual

96041 Revision P 1-63

Sun Confidential - Internal Only

DLT Drives with Load Handles

CAUTION:

Drive load failure: Make sure that the crank handle is inside the handle escapement

slot.

6. Carefully slide the drive tray over the drive, making sure that the crank handle is inside the handle

escapement slot.

1. Crank handle (inside handle escapement slot)

7. Using a Torx driver, attach the four screws on the bottom of the drive tray in the sequence shown below.

1. Tighten first (near load handle)

2. Tighten second

3. Tighten third

4. Tighten last

L201_330

L201_331