Service manual

Drive SCSI Cable Assembly
1-54 Revision P 96041
Sun Confidential - Internal Only
2. Connect the SCSI connector to the drive.
1. Connector
CAUTION:
Possible equipment damage: Make sure that the SCSI cable does not block the fan
before you close the drive door.
Possible cable damage: Make sure that you move the SCSI cable out of the way
before you close the drive door.
3. Turn the drive door knobs all the way to your left, then all the way to the right to fasten the drive
door.
Note: Newer model libraries have overlapping drive doors with two knobs instead of four. Push in the
knobs, then turn them all the way to the right.
4. Return the defective FRU according to your country’s warranty agreement.