Service manual

Picker

1-50 Revision P 96041

Sun Confidential - Internal Only

10. From under the library, attach the picker plate with the two T10 screws.

1. Screws (2)

11. Test for free movement of the picker by gently moving the picker (at its base) around the full distance

of the track.

12. Power-on the library and make sure that it fully initializes.

13. Run diagnostic tests (described in the L20 Tape Library User’s Guide, part 95961).

14. Return the defective FRU according to your country’s warranty agreement.

L201_194