Service manual

Picker

1-48 Revision P 96041

Sun Confidential - Internal Only

Replacement

CAUTION:

ESD damage: Make sure that you have followed the ESD precautions in

“ESD Precautions” on page xxii.

1. Remove the picker from its static-protected shipping bag.

2. Turn over the picker.

3. Connect the picker cable connector (P601) to the circuit card.

1. P601

2. Picker

4. Route the cable into the cable channel.

5. Slide in the cable protector.

Note: Make sure that the cable fold is as close as possible to the picker.

6. Snap the cable bracket into place.

1. Picker

2. Cable protector

3. Cable bracket

L201_196

L201_195