Service manual

96041 Revision P 1-41

Sun Confidential - Internal Only

Operator Panel

5. Align the metal bracket to fit within the alignment slots.

1. Metal bracket

2. Alignment slot (4)

6. Loosely thread the T15 screws into the operator panel.

7. Check that connector P702 is visible on the inside of the drawer.

CAUTION:

Possible wire damage: Make sure that the wires from connector P702 are loose and

are not damaged when tightening the operator panel screws.

8. Tighten the three T15 screws.

1. Operator panel

2. Screws

L201_185

L201_182