Service manual

96041 Revision P 1-37

Sun Confidential - Internal Only

Operator Panel

Removal

1. Follow the procedures in “Repair Setup” on page 1-1.

CAUTION:

ESD damage: Make sure that you have followed the ESD precautions in “ESD

Precautions” on page xxii.

2. Unlock and pull open the drawer.

3. Press down lightly on the top of the plastic cover (shown below) to release it.

4. Tip the top of the plastic cover toward the rear of the library and pull out the cover.

Note: Newer model libraries do not have a plastic cover.

1. Plastic cover (labeled “Cleaning Cartridge

Location”)

2. Operator panel

5. Using a T15 Torx driver, remove the four screws that attach the front cover to the library.

1. Front cover

2. Screws

L201_178