Service manual

96041 Revision P 1-11
Sun Confidential - Internal Only
External Fibre Channel Router
Removal
1. Follow the procedures in “Repair Setup” on page 1-1.
2. Remove power from both the library and the router.
3. Remove the internal fibre channel router card, if installed. See “Fibre Channel Router Card” on
page 1-5.
4. Disconnect the SCSI, fibre, and power cables from the rear of the external router.
1. SCSI cables
2. Fiber cables
3. Power cable
CAUTION:
Router weighs about 4 kg (9 lb). If necessary, have a second person hold the router
in place while removing screws and washers.
5. While supporting router, remove four screws and washers securing router to rack and remove
router.
1. Screws and washers