Service manual

xx Revision P 96041
Sun Confidential - Internal Only
■ Fiber-optic Safety
WARNING:
Eye hazard. Never look directly into a fiber-optic cable, a fiber-optic
connector, or a laser transceiver module. Hazardous conditions might
exist from laser power levels that are capable of causing injury to the
eye.
Be especially careful when using optical instruments with this
equipment. Such instruments might increase the likelihood of eye injury.
The laser transceivers in fiber-optic equipment can pose dangers to personal safety.
Ensure that anyone who works with this Sun StorageTek equipment understands these
dangers and follows safety procedures. Ensure that the optical ports of every laser
transceiver module are terminated with an optical connector, a dust plug, or a cover.
Each fiber-optic interface in this Sun StorageTek Fibre Channel equipment contains a
laser transceiver that is a Class 1 Laser Product. Each laser transceiver has an output of
less than 70 μW and a wavelength of 850 nm. Sun StorageTek’s Class 1 Laser Products
comply with EN60825-1(+A-11) and with sections 21 CFR 1040.10 and 1040.11 of the
Food and Drug Administration (FDA) regulations.
The following translations are for users in Finland and Sweden who wish to identify laser
safety and classification:
CLASS 1 LASER
LUOKAN 1 LASERLAITE
KLASSE 1 LASER APPARAT
Laser Product Label
In accordance with safety regulations, a label on each Sun StorageTek Fibre Channel
product identifies the laser class of the product and the place and date of the
manufacturer. The label appears on top of a Fibre Channel tape drive and near the Fibre
Channel connectors on a Fibre Channel tape library. A copy of the label is shown here:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1
COMPLIES WITH 21 CFR 1040.10 AND 1040.11