Operating instructions

Installation Instructions K3 Series
9
3. Carefully manipulate base cover (E) to create an opening
large enough to wrap cover around array column. (See
Figure 4)
4. Wrap base cover around column and slide it down until base
cover fits securely onto table top base (C). (See Figure 4)
Figure 4
5. Snap column cap (D) onto top of column assembly (A). (See
Figure 5)
Figure 5
6. Apply bumpers (G) to underside of table top base (C). (See
Figure 6)
Figure 6
K3G Mounts (Grommet)
1. Use four 1/4-20 x 1 1/4” flat head cap screws (F) to secure
grommet plate (P) to array assembly (A). Make sure longer
legs of grommet plate are aligned with the front of column.
(See Figure 7)
Figure 7
2. Apply bumpers (G) to underside of grommet plate (P). (See
Figure 8)
Figure 8
3
3
4
(E)
(D)
(A)
5
(G) x 6
(C)
(P)
(A)
1 (F) x 4
front of column
(P)
(G) x 6