Operating instructions

Align the neck with the base and snap it into
place.
Using a Phillips screwdriver, insert
three (3) M4 x 14mm screws into holes on
the bottom of the base and tighten them to
secure it to the neck.
2
Align the neck piece with the slot in the bottom of
the TV and slide it into place as shown.
Using a Phillips screwdriver, insert four (4)
M4 x 14mm screws into the holes on the back of the
TV and tighten them to secure the neck to the TV.
When you are finished, place the TV on a stable,
level surface.
3