SmartWAV2-SerialMode_R1

SMARTWAV 2

Serial Mode

1.2- Features:

 Pre-amplified dual channel stereo out with 8/16bit, stereo/mono,

and up to 48khz sampling rate, CD quality.

 Up to 14 channel polyphonic playback / auto mixing.

 Integrated digital volume control with 1/100 steps.

 Eight modes of operation, including Slave and Stand-Alone

modes (M0, M1 and M2 Input pins for mode selection).

 MIDI mode compliant with channel selection.

 On board stereo 3.5mm plug for headphones, or line out.

 Easy 5 pin interface to any host device: VCC, TX, RX, GND, RESET.

For standard serial mode.

 On-board uSD/uSDHC memory card socket with FAT/FAT32

support up to 32GB for storing thousands of tracks/audio WAVE

files. No need of special/rare file formatting.

 Special data-logging FAT file create, open, read, write, delete,

etc. functions with Long File Names and folder nesting /

management support.

 57600bps standard default baud rate speed for standard serial

mode, 8 bits, no parity, 1 stop bit.

 5V and 3V3 I/O compatible.

 3V3 power supply, ultra-low current consumption.

 Sleep & Stand-by modes.