SmartWAV2-SerialMode_R1

SMARTWAV 2
Serial Mode
Vizic Technologies ©2020 | 47
Example 2:
Sent data:
-42,01,00,00,00,00,00,00,00,00- Reset channel
1 point A and point B parameters are equal),
this will set points to their defaults: beginning
of the track 00:00:00 and XX:XX:XX end of the
track.
Received data:
-4F- OK.
Example 3:
Sent data:
-42,03,00,01,D4,C4,00,04,93,E0- Set channel 3
point A to time 00:02:00 (120000 milliseconds)
and point B to time 00:05:00 (300000
milliseconds).
Received data:
-4F- OK.
Example 4:
Sent data:
-42,FF,00,01,D4,C4,00,04,93,E0- Set all active
channels point A to time 00:02:00 (120000
milliseconds) and point B to time 00:05:00
(300000 milliseconds).
Received data:
-4F- OK.
*All data is in hex.