SmartWAV2-SerialMode_R1

SMARTWAV 2
Serial Mode
Vizic Technologies ©2020 | 43
7.7 Advance to Point (In Milliseconds) - 45hex - ‘E’ ascii
Commands (host)
byte(s)
1.- 0x45 (hex), E (ascii).
2.- Channel 0x00 to 0x0D or 0xFF (hex) for All.
3.- Milliseconds - High Byte.
4.- Milliseconds - Medium High Byte.
5.- Milliseconds - Medium Low Byte.
6.- Milliseconds - Low Byte.
Responses (device)
byte(s)
1.- 0x4F (hex), O (ascii) - Success ACK or
0x46 (hex), F (ascii) - Fail NAK.
Description
Advance to point in time (Milliseconds) the
mounted track on the received channel (0
to 13), the time is always calculated from the
beginning of the track (not depends on Point
A). This command is useful to fast forward or
fast backward a track.
The current audio playing position/point of
each channel track is handled by the
processor in Milliseconds; In order to convert
the next formula can be applied:
Milliseconds = (seconds x 1000)
or
seconds = (Milliseconds / 1000)
A track must be already mounted in the
selected channel for this command to work.
*The advance to point command is
independent of point A and point B, could
be set inside or outside the A and B markers.
If the received point parameter is farther