SmartWAV2-SerialMode_R1

SMARTWAV 2
Serial Mode
Vizic Technologies ©2020 | 29
Only when an ACK has been received by
the host, the next commands must be sent
at the new received baud rate.
*Default power-on/reset baud rate is
57600bps.
Examples (sent and
received commands)
Example 1:
Sent data: At current baud rate
-58,00,01,C2,00- Set 115200bps baud rate.
Received data: At current baud rate
-4F- OK.
(delay 500ms)
Received data: At new baud rate
-4F- OK.
*All data is in hex.