SmartWAV2-SerialMode_R1

SMARTWAV 2
Serial Mode
Vizic Technologies ©2020 | 20
6.2 Reset System - 59hex - ‘Y’ ascii
Commands (host)
byte(s)
1.- 0x59 (hex), Y (ascii).
Responses (device)
byte(s)
1.- 0x4F (hex), O (ascii) - Success ACK or
0x46 (hex), F (ascii) - Fail NAK.
Description
Requests to the SmartWAV 2 processor to
perform a software reset, all internal state
machines and configurations are reset, this
command has the same effect as applying
an external hardware reset.
Examples (sent and
received commands)
Example 1:
Sent data:
-59- Reset System.
Received data:
-4F- OK.
*All data is in hex.