SmartWAV2-SerialMode_R1

SMARTWAV 2

Serial Mode

Point A and Point B are markers that the processor handles for each

channel for rewind, loop points and other functions. Each time a track

is mounted, the points A and B are set at their defaults: A-Start of track

and B-End of track (blue color).

User can later set and re-define those A and B points (green color) by

the respective command.

The next diagram visually explains the above:

SmartWAV 2 Point A and Point B:

The bits per sample of each channel are internally obtained from the

mounted .wav track, those are automatically handled by the system

and user does not have to worry on how to handle those. If the user

needs this parameters, those can be requested with the respective

command.

The audio channels (1 for mono and 2 for stereo) are internally

obtained from the mounted .wav track, those are automatically

handled by the system and user does not have to worry on how to

handle those. If the user needs this parameters, those can be

requested with the respective command.