SmartWAV2-MidiMode_R4

SMARTWAV 2

MIDI Mode

7- SmartWAV2 MIDIConfig.txt File:

At system boot/start SmartWAV2 always look for a file called

“MIDIConfig.txt” in the root path, this file is used to provide SmartWAV2

with some configurations and parameters, this file is optional as are its

parameters, if any of the next configuration parameters are not

present, the defaults will be taken.

-Master Gain: If the file contains the word MASTERGAIN: followed by a

number between 0-100, SmartWAV2 will take this and set the gain to

the system, this can be used as a “start volume”. Default master gain

volume is 100.

-Release Time: If the file contains the word RELEASETIME: followed by a

number between 0-127, SmartWAV2 will take this and set the system

release time. Default release time is 400ms.

-Hi-Hat Close Note: If the file contains the word HHCLOSENOTE:

followed by a number between 0-127, SmartWAV2 will take this note

and save during system execution.

-Hi-Hat Open Note: If the file contains the word HHOPENNOTE:

followed by a number between 0-127, SmartWAV2 will take this note

and if during system execution, a “Note On” command with note

number same as the saved HHCLOSENOTE is received, the system will

automatically stop playing the track number HHOPENNOTE (open hi-

hat note sound), this will simulate a hi-hat close pedal action. This

functionality is intended for drum modules / percussion applications.

-Sample Rate: If the file contains the word SAMPLERATE: followed by a

number between 8000-44100, SmartWAV2 will take this and set the

system main sample rate. Default main sample rate is 44100.

-Loop: If the file contains the word LOOP, SmartWAV2 will enable the

looping functionality of the system. Default loop is disabled.