SmartWAV2-MidiMode_R4

SMARTWAV 2

MIDI Mode

Based on the above microSD card contents, once a Program Change

command with Program/Patch Number 64 is received, the system will

go inside folder “064” and consecutive Note ON commands will try to

trigger “.wav” files that are inside “064” folder. If a second Program

Change command with Program/Patch Number 0 is received, the

system will now go out of folder “064” and enter inside folder “000”,

then consecutive Note ON commands will try to trigger “.wav” files

that are inside “000” folder. In the case a folder does not exist or can’t

be opened, the system will return to the master folder or root path.

If the MIDI host that will control SmartWAV2 does not support Program

Change commands, then the “.wav” files must be placed on the

master folder or root path instead of “000” to “127” folders.