SmartWAV2-MidiMode_R4

SMARTWAV 2
MIDI Mode
Vizic Technologies ©2020 | 18
5.2 Note ON
The MIDI Note ON command is supported; it basically triggers the
sound of a received note/track; the velocity parameter determines
the amount of volume for the track.
5.3 Polyphonic Key Pressure(Aftertouch)
This command type is not supported by SmartWAV2 and all incoming
Polyphonic Key Pressure commands are ignored.
5.4 Control Change
Control Change commands can modify and set several
functionalities on the run of a MIDI system, there’s not a perfectly
defined table of this commands that all manufactures follow and
respect, but there are many commands that could be called
standard among the most manufacturers of MIDI devices.
Control Change commands consist of 2 parameters: the command
number(type), and the command value/parameter.
The next table shows the most standard MIDI commands and the ones
in bold black are the ones that SmartWAV2 support, all other
command numbers(types) are ignored:
Command
Number(Type)
Function
Command Value
0
Bank Select
0-127
1
Modulation Wheel or Lever
0-127
2
Breath Controller
0-127
3
Undefined
-
4
Foot Controller
0-127
5
Portamento Time
0-127
6
Data Entry MSB
0-127
7
Channel Volume(Master Gain)
0-127
8
Balance(Same as Panning)
0-127
9
Undefined
-
10
Panning(Same as Balance)
0-127
11
Expression Controller
0-127
12
Effect Control 1
0-127
13
Effect Control 2
0-127