User`s guide

VIXEL INSPEED™ SAN STORAGE SWITCH MODEL 375 APPENDIX B CLI QUICK REFERENCE
USER’S GUIDE
EMBEDDED IN THE FUTURE OF STORAGE 64
USING THE CLI
The CLI enables users to monitor and change system and port configurations, configure One-Step
Zoning, Automatic Trunking, Load Balancing, and event reporting parameters, and download and
install firmware.
For additional information on the CLI, see the InSpeed Storage Switch CLI Reference Guide.
To enter a command:
• Type the command text or the number of the command.
To return to the previous menu:
Type .. and press E
NTER.
To return directly to the Root menu:
Type root and press E
NTER.
To cancel a prompt or input request:
Press E
NTER.
To display help for specific command:
Type ? <command> and press E
NTER.
To save changes to the switch configuration at any time:
1. Type save at any command prompt and press E
NTER.
A message appears confirming the request.
2. Type y and press E
NTER.
FREQUENT SWITCH CONFIGURATION TASKS
A list of frequent switch configuration-related tasks is provided below. The list displays the task
and the corresponding CLI command.
To… Type…
View switch status show sysinfo
Change general switch configuration config sys
Change the IP Address config network ip
Change the switch speed config sys speed
View the event log show events
Upgrade the firmware fw
Change the port settings config port
Configure zoning config zone
Configure trunking config load
Configure load balancing config trunk
Reset the switch reset
Perform diagnostics diag
Reset the switch to factory default settings config default
Change the password config password