Specifications

softek.fujitsu.com

Stealth-3 Tab

LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION

Stealth-3 Tab

The Stealth-3 tab (not available for Vixel 8100) allows you to select the desired port

address setting and advanced settings for LIP (Loop Initialization Primitive)

propagation and LIRP/LILP support for ports when the switch is running under

Stealth-3 Mode (or when the switch is running under Fabric (Public/Private) Mode

and one or more ports are using private addresses). The advanced settings are

downloaded to the switch when Apply ALL or Apply is clicked; note that the

advanced settings can be applied separately (without applying other configuration

settings) through the Apply Advanced Settings button. This tab also displays port

statistics for addresses and world-wide names.

The port colors indicate whether the port has obtained sufficient addresses: green

indicates sufficient addresses while yellow indicates insufficient addresses (gray

indicates that no GBIC is inserted in the port). If all ports have sufficient addresses, no

configuration is needed. If more configuration is needed, choose the appropriate port

address setting for each port according to their descriptions below.

Stealth-3 Tab, Configure Switch Dialog Box

Textboxes and selections in the Stealth-3 tab are described below.