Specifications

Stealth-2/Stealth Tab
80
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
To view all ports at one time, click Show All... to display the Stealth Configuration
Table window (below). To view more columns, move the scroll bar or resize the
window.
(Note on Vixel 8100 Fabric Switches: If configuration settings in this window are not
the same as those in the Stealth tab, the settings probably weren’t validated. Make sure
you click Validate Port in the Stealth tab after configuring a port.)
Stealth Configuration Table Window
Disable All
Ports or
Disable
Selected Port
Within the Configure Switch dialog box, resets all the
quantity fields, sets the Device type to None, sets the
Port type to Stealth Loop, deselects LIP if Storage
Added, sets the JBOD quantity to zero, clears the Fabric
number or Switch number field. Use this to prevent
AL_PA contention during configuration or to clear the
factory defaults.
Show All... Displays settings for all ports at a glance.
Validate Port
(Vixel 8100)
Checks the configuration settings for the selected port
and displays error messages if invalid settings are
found.
Stealth-2 Tab Options
Textbox or
Selection Description