Specifications

Stealth-2/Stealth Tab
78
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Stealth-2 Tab Options
Textbox or
Selection Description
Select port Allows you to select a port to configure.
Port Type
(Protocol)
• AutoDetect (default for Vixel 7100/7200):
Automatically detects the protocol used by the port.
Valid for all Switch Address Modes on Vixel 7100/
7200.
• E_Port: Cascaded switch port. Valid for Fabric and
Fabric (Public/Private) Mode.
• F_Port: Used for attaching another switch (switch to
switch connection) or for a direct point-to-point
connection for individual hosts or raids. Full duplex,
no arbitration, faster transfer, used for initiators.
Valid for all Switch Address Modes; device type
must be “Switch_8” or “Switch_16” for Stealth-2
(“Fabric” for Stealth).
• FL_Port: Switch loop port. Valid for Fabric and
Fabric (Public/Private) Mode.
• G_Port: Generic port; can act as either F_Port or
E_Port. Valid for Fabric and Fabric (Public/Private)
Mode on Vixel 7100/7200.
• Stealth Loop (default for Vixel 8100): Used for
private devices. Valid for all Stealth Modes.