Specifications

softek.fujitsu.com
System Tab
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
69
 NOTE:
When the Switch Address Mode is changed for a Vixel 7100/7200 Switch, the switch
keeps any existing Zoning configuration. Other configuration settings are replaced by
the default settings of the new Switch Address Mode, except when changing from
Fabric Mode to Fabric (Public/Private) Mode.
Textboxes and selections in the System tab are described below.
System Tab Options
Textbox or
Selection
Applicable
Mode(s) Description
Apply System
Name (or, for
Vixel 8100,
System Name)
All User-defined name for switch. The
Apply System Name button
(available for Vixel 7100/7200)
downloads only the system name to
the switch.
Switch
Address Mode
--- The method used by the switch to
assign addresses to connected
devices (availability depends on
switch model and version of
running firmware):
• Fabric for fabric-capable devices.
• Fabric (Public/Private) for a mix
of public hosts and private (or
public) storage devices.
• Stealth-3 for private devices;
allows address negotiation.
• Stealth-2 for private devices;
makes Vixel 7100/7200
interoperable with Vixel 8100 in
Stealth Mode.
• Stealth for private devices on
Vixel 8100.
Request
Domain
Address
Fabric,
Fabric (Public/
Private)
When this checkbox is checked, the
new configuration applied, and the
request accepted (as indicated in
“Assigned Domain Address”),
uniquely identifies the switch.
Address range is 01 - EF
(hexadecimal); default is 01.