Specifications

softek.fujitsu.com
File Menu
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
67
The Configure Switch dialog box has configuration options under the File menu and,
within the dialog box, the following tabs:
• System
• Time Settings
• Ports
• Stealth-2 or Stealth (depending on the switch model)
• Stealth-3 (for Vixel 7100/7200)
• Logging
• Zoning
• Version Info
• Device Info
• Sensor Info (for Vixel 8100)
• Options (for Vixel 7100/7200 or Vixel 9100/9200/9300).
Tabs are grayed out if their options do not apply in the selected Switch Address Mode
(Stealth-3, Stealth-2, Stealth).
File Menu
The File menu for the Configure Switch dialog box has the options shown below.
File Menu for the Configure Switch Dialog Box
Between the standard Close window and Exit Softek SANView Client options are
several options for opening, closing, and saving configurations. You can save
configuration files to record a particular set of configurations or to download at a later
time.
Load Configuration from file... opens a previously saved configuration file or zone
configuration file. Make sure you click Apply or Apply ALL if you want to download
this configuration information to the switch.