Specifications

softek.fujitsu.com
Tools Menu
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
53
Tools Menu
The Tools menu has the options shown below.
Tools menu for a Vixel 9100 Switch window
Poll now immediately polls the switch for information instead of waiting for the next
poll interval.
Configure Switch... displays the Configure Switch dialog box, which reads and shows
configuration items from the switch (see the configuration status line at the bottom of
the Configure Switch Dialog Box on page 54). In this dialog box, you can open and save
a configuration file or the factory default configuration, apply (download) a
configuration to the switch, or read the switch current configuration again. For an in-
depth look at all information in this dialog box, see Configure the Switch Dialog Box on
page 63.
Launch Web Manager (available for switches that use WWN zoning; grayed out if
WWN zoning switch is in one of the Stealth Modes) opens the switch Web Manager
for WWN zoning and other configuration. For information on the Web Manager, see
the documentation that shipped with the switch.
Configure traps displays the Trap Configuration dialog box. For information on the
selections in this dialog box, see The Trap Configuration Dialog Box on page 21.
Configure firmware image... displays the Firmware Image Configuration dialog box.
For information on the selections in this dialog box, see The Firmware Image
Configuration Dialog Box on page 13.