Specifications

softek.fujitsu.com
View Menu
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
47
The columns in the FSPF Routing Table window are listed in order of display and are
described in the table below. Note that the selected switch is identified in the title bar
of the FSPF Routing Table window; each destination switch is identified in the
Destination column (by its domain or fabric address, represented by the first two
characters).
FSPF Table Columns
FSPF
Columns
Description
Destination A destination switch (identified by its domain or fabric
address) that can communicate with the selected switch
(identified in the title bar of the FSPF Routing Table win-
dow).
Note: Only the first two characters contain address informa-
tion.
Port Number The port in the selected switch that can communicate with
the destination switch (identified in the Destination col-
umn).
Note: An entry of “0” (zero) entry represents the table entry
for the selected switch.
Cost Burden of this path to the destination switch. Cost is typi-
cally related to the number of switches that the selected
switch must go through to communicate with the destina-
tion switch. Frames are routed via the path with the lowest
cost, or “lightest burden.” (Cost = S * (1.0625e12 / link
speed in bits per second) where S is an administratively
defined factor.
For more information, see the OSRP specification at the
T11 website.)
Next Hop The next switch (identified in this column by its domain or
fabric address) that the selected switch must go through to
communicate with the destination switch.
Note: Only the first two characters contain address informa-
tion.
Age Number of seconds since this line has been added to or
updated in the FSPF Routing Table.