Specifications

View Menu

LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION

 NOTE:

Network drives can be accessed only if they are mapped to a drive letter. In file names,

avoid the following characters (separated by commas): \, /, :, *, ?, “, <, >, {, }, [, ], (, ), |.

FSPF Table

Displays the FSPF Routing Table window (shown below). Availability of this window

depends on the switch model and firmware version. The switch must be running

Fabric Mode and Fabric (Public/Private) Mode. This window identifies the other

switches that the switch can communicate with and characterizes the communication

paths. You can save this information to a file (see the File menu).

FSPF Routing Table Window

RIP Statistics

RIP Statistic Description

Input Packets Number of RIP packets received.

Output Packets Number of RIP packets sent out.

Input Good Packets Number of good RIP packets received.

Input Discard Pack-

ets

Number of discarded RIP packets received.

Polling interval Determines the length of time between polls. The poll-

ing interval can be set to any length of time between 5

and 305 seconds.