Specifications

The Trap Configuration Dialog Box
22
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Trap Configuration Dialog Box
The “Trap List” (upper portion of the dialog box) lists an entry for each configured trap
destination. The “Trap List” columns are defined below.
Trap List
Trap List column Definition
IP Address IP Address of the destination system.
Port Port of the destination system that is configured to
listen for traps.
Community String Password, if applicable.
Severity Level The type of event messages that you want to trigger
traps. For example, selection of the “alert” severity
level configures traps to be sent only when event
messages of the “alert” severity or higher occur.
(Severity level configuration is not available for
Vixel 8100.)