Specifications

The Zone Scheduler Dialog Box
18
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
• The selections under Edit Selected Item (bottom area of dialog box) are described
below.
33
Selections Under Edit Selected Item
Selection or
Textbox Description
Device IP Drop-down list of monitored hubs and
switches on which zoning is supported.
Persistent When checked, ensures that the zoning
configuration remains when power is cycled to
the hub or switch.
Enabled When checked, allows scheduled zoning to
occur at specified time(s).
Zone File^ Drop-down list of available zone configuration
files.
Run Options Determines how often the zoning
configuration is applied to the hub or switch.
Start At Determines the time and day at which the
zoning configuration is applied to the hub or
switch.
Add New Item Creates an entry in the “Items Available in the
Zone Scheduler” list with the specified
settings.
Remove Selected
Item
When an entry within the “Items Available in
the Zone Scheduler” list is selected, deletes
that entry.
Update Selected
Item
When an entry within the “Items Available in
the Zone Scheduler” list is selected, applies all
settings configured within the Edit Selected
Item area (bottom half of dialog box).
^ All device configuration files are saved to the appropriate vendor directory
in*:
• (Windows) C:\SANView\SIFileSystemRoot\deviceconf\
• (UNIX) /opt/SANView/SIFileSystemRoot/deviceconf/
*Files are located on the Softek SANView Server system. The listed locations
assume that the default installation directory for Softek SANView was accepted
and that Softek SANView’s Root Directory parameter is unchanged. (By default,
Softek SANView’s Root Directory is named “SANView” and is placed inside the
accepted installation directory.)