Specifications

The Firmware Image Configuration Dialog Box
14
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
 NOTE:
For files to be transferred, the TFTP client must initialize correctly on port 69 when the
Softek SANView Server is started. Otherwise an error message is displayed when
Download is clicked. (TFTP client initialization errors are recorded in the
SIServer.err file, which is located in
install_dir/bin, where install_dir is the
installation directory.)
• The selections in the Firmware Image Configuration dialog box are described
below.
33
Firmware Image Configuration Dialog Box Selections
Selection Function
File Name^ Allows you to enter the path and filename of the
desired firmware image file. The combined path and
filename are limited to 128 characters, starting from
and including the deviceconf/ directory.
Browse Allows you to search for the firmware image file
within the appropriate vendor directory.
Set Boot
Image
Allows you to choose the desired image for
activation upon agent reset.
Download Transfers file (through TFTP) to the device.
Abort
Download
Stops the file transfer.
Help Displays Softek SANView online help.
^
All firmware image files are accessed from the appropriate vendor
directory in*:
(Windows) C:\SANView
\SIFileSystemRoot\deviceconf\
• (UNIX) /opt/SANView
/SIFileSystemRoot/deviceconf/
*Files are located on the Softek SANView Server system. The listed locations
assume that the default installation directory for Softek SANView was
accepted and that Softek SANView’s Root Directory parameter is
unchanged. (By default, Softek SANView’s Root Directory is named
“SANView” and is placed inside the accepted installation directory.)