Specifications

softek.fujitsu.com
The Firmware Image Configuration Dialog Box
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
13
This section describes the selections of Softek SANViews Firmware Image
Configuration dialog box as it applies to Vixel devices. This dialog box can be opened
from Vixel hub and switch windows through the Configure firmware image... option
in the Tools menu.
The Firmware Image Configuration Dialog Box
The Firmware Image Configuration dialog box is shown below.
Firmware Image Configuration Dialog Box
NOTE:
The devices IP Address (which is listed in the title bar of the dialog box) must be
included in either the Domain Name System (DNS) or the host name file on the Softek
SANView Server system for file transfer to occur. Host name files are typically located
in C:\WINNT\system32\drivers\etc\Hosts [Windows] or
/etc/hosts [UNIX].
To register a managed device, obtain the devices IP Address and device name from
the system administrator, open the host name file in an editor (such as Notepad), type
the devices IP Address and device name (on one line), and save the file.
The TFTP Host IP (read-only) textbox automatically lists the IP Address of the Softek
SANView Server system.