Specifications

softek.fujitsu.com
Sweep Tab
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
125
ARB A port is arbitrating for loop access.
ARB(FF) ARB(FF)s are being transmitted to maintain link
activity; no other data is being transmitted.
R_RDY The receiving node on this port has sent an
R_RDY signal, indicating that it is ready for a
frame to be transmitted over the link.
IDLE (3x) Sequences of IDLES are being transmitted to
maintain link activity; no other data is being
transmitted.
SOF A Start-of-Frame (SOF) delimiter has been
detected; frames are present on the loop.
EOF An End of frame (EOF) delimiter has been
detected; frames are present on the loop. (An
EOF immediately follows the CRC of a frame
and signals the frame’s end.)
CLS The port is attempting to begin the process of
closing the current loop circuit.
Invalid Tx Word An invalid transmit word has been detected.
Frame CRC Err. A Frame CRC error has been detected.
Pt. to Pt. Seq. A point-to-point sequence has been detected.
Match The ordered set or pattern selected under the
Match area has been detected.
Other OS An ordered set other than those displayed
above has been detected.
Sweep Tab Options 4
Port Detection Field* Indication
* “(3x)” means three consecutive occurrences have been detected.