Specifications

softek.fujitsu.com
Sweep Tab
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
123
Information in this dialog box is described in the tables below.
Sweep Tab Options 1
Field Possible values
Loop State • Active (SOFs) - Data is going around the loop. Loop
is up.
• Down - No Comma characters are going around the
loop.
• Initializing - LIP(s) have been detected on the loop.
• OpenInit - Initialization frames are being
transmitted and received in order to identify a loop
master and assign AL_PA values.
• Up - A loop master has been identified and AL_PA
values have been assigned.
Sweep Tab Options 2
User Entry or
Selection Function
Default
Value
Update interval Determines the number of milliseconds
between sweep intervals.
4000
Port Detect for Determines the number of milliseconds
that Sweep monitors a specific port before
moving on to the next port.
300
(valid
range is
300 -
15,000)
(ordered set
pull-down
menu) under
Match
Lists ordered sets that can be selected for
matching.
ARB F(0)
K28.5 “D” fields
under Match
Allows you to define the pattern to be
matched by filling in valid Fibre Channel
data characters in the “D” fields. For
example, you could select the OPN
ordered set from the Match pull-down
menu, then add the specific source and
destination AL_PA values to the “D” fields
to find a more specific match than the
standard OPN( ) from the pull-down
menu.
--
Match Sig (1x) Constitutes a match with one occurrence of
the ordered set.
(selected)
Match Seq (3x) Constitutes a match with three consecutive
occurrences of the ordered set.
(not
selected)