Specifications

softek.fujitsu.com
Overview
LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
113
Overview
This section describes the functions and selections of the Configure Hub dialog box,
which is used to configure Vixel Hubs within Softek SANView.
Each dialog box and window is referred to by the name that appears in its title bar.
The Configure Hub dialog box allows you to configure zones and set policies through
the following tabs:
• Zoning – Allows you to add or remove ports from desired zones.
• Policies – Allows you to define port insertion policies.
This section provides an in-depth look at all information in the Configure Hub dialog
box.
 NOTE:
The Zoning tab is visible only when the zoning feature has been enabled on the hub.
If the zoning feature is not yet enabled, the Zoning tab is grayed out.
 To open the Configure Hub dialog box:
• Choose Configure Hub... from the Tools menu of the desired Hub window.