Hardware manual

26 TITAN SILICONSERVER HARDWARE MANUAL
Replacing a Server PSU
1. Verify that the power switch on the faulty PSU is in the OFF position.
2. Remove the power cord.
3. Unscrew the Retaining Screw of the faulty PSU.
4. Remove the PSU from the server.
5. Ensure that the power switch on the replacement PSU is in the OFF position.
6. Insert the replacement PSU.
7. Replace the Retaining Screw of the PSU.
8. Insert the power cord.
9. Switch the power to the ON position on the replacement PSU.
Power Switch
Power Supply
Unit 1
Power Supply
Unit 2