Installation guide

- 8 -
www.vivotek.com
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet
cable plug in the power adapter. If the LED turns out to blink green-color, go to next
paragraph “Software installation”.
This Video Server provides a general I/O terminal block with one digital input and one
digital output device control. The pin definition is as below.
Software installation
At the end of the hardware installation, users can use Installation Wizard program
included in the product CDROM to find the location of the Video Server. There may be
many Video Servers in the local network. Users can differentiate the Video Server with
the MAC. The MAC is printed on the labels on the back of the Video Server body. Please
refer to the user’s manual of Installation Wizard 2 for detail.
Once installation is complete, the Administrator should proceed to the next
section "Initial access to the Video Server" for necessary checks and
configurations.