Installation guide

- 110 -
www.vivotek.com
D. Technical specifications
- System
CPU: Vivotek VVTK-1000
RAM: 64MB SDRAM
ROM: 8MB FLASH ROM
- Networking
Protocol
TCP/IP, HTTP, SMTP, FTP, DDNS, UPnP, Telnet, NTP, DNS,
DHCP and RTSP
Physical
10 baseT or 100 baseT Fast Ethernet auto negotiation
- Video
Algorithm supported
MPEG4 and Motion JPEG
Features
Adjustable image size, quality and bit rate
Time stamp and text overlay
B/W or color control
3 motion detection windows
Privacy mask
Resolution
MPEG-4
Up to 30/25 frames at 176x112/176x144
Up to 30/25 frames at 352x240/352x288
Up to 17 frames at 704x480/704x576
MJPEG
Up to 30/25 frames at 176x112/176x144
Up to 30/25 frames at 352x240/352x288
Up to 12 frames at 704x480/704x576
Capture & Decode Chip
Philips SAA7113H; 9 bit video input processor
- Audio
AAC, GSM-AMR
Bit rate: 16Kbps to 128 Kbps for AAC
Bit rate: 4.75Kbps to 12Kbps for GSM-ARM
- Serial Port
RS485 supported for remote PTZ control
- LED indicator
One color status indicator
Red * 1 & Green *1
- Dimension
137.7mm(L) * 78.35mm(W) * 33.85mm(H)
- Weight
NET. 200g
- Power
Input: 100-240VAC, 50/60Hz, 0.5A
Output: 12VDC, 2A
- Operating Environment
Temperature: 0-40°C/32-104°F
Humidity: 20% to 80%
- EMI & Safety
CE, FCC, VCCI
- Viewing system requirement
Operating system
Microsoft Windows 2000/XP
Browser
Internet Explorer 6.x or above
Firefox 1.5.0.x or above
PAN/TILT/ZOOM
Multiple PTZ camera control through RS485
Currently supported devices and protocols:
DynaDome/SmartDOME, Lilin PIH-7x00, and
Pelco D protocol
CGI command serial driver is supported