Installation guide

- 24 -
www.vivotek.com
original event
z Check the server name set in Step 10 and select the media name set in Step
11.
13. Click on save to validate.
Firmware upgrade
Click on “Maintenance” at the left column. This feature allows you to upgrade the
firmware of your Video Server. It takes a few minutes to complete the process.
Note: Do not power off the Video Server during the upgrade!
Follow the steps below to upgrade the firmware:
1. Download the latest firmware file from the VIVOTEK website. The file is in .pkg file
format.
2. Click Browse… and specify the firmware file.
3. Click Upgrade. The Video Server starts to upgrade and will reboot automatically
when the upgrade completes.
If power fails during the writing process of Flash memory, the program in the
memory of the Video Server may be destroyed permanently. If the Video Server
cannot restart properly, ask your dealer for technical service.