User`s manual

Privacy mask
Advanced Mode
Click Privacy Mask to open the settings page� On this page, you can block out certain sensitive zones to
address privacy concerns�
■ To set the privacy mask windows, follow the steps below:
1� Click New to add a new window�
2� Use the mouse to size and drag-drop the window, which is recommended to be at least twice the size
of the object (height and width) you want to cover�
3� Enter a Window Name and click Save to enable the setting�
4� Check Enable privacy mask to enable this function�
► Up to 5 privacy mask windows can be congured on the same screen.
► If you want to delete a congured mask window, click on the ‘X’ button at the upper right corner of the
window�
2011/03/15 17:08:56
NOTE: